购买链接：https://detail.1688.com/offer/1077499053111.html?spm=a28888.manage-offer.0.0.26227197mFvb7s

型号：KTD-BC00B-1617-E55Y-PRQ

品牌：博思特Posital

名称：旋转编码器

接口

接口 BiSS C with Preset

手动功能 Preset via cable or connector

接口周期时间 ≥ 50 µs

诊断 Error and Warning Bits, Register Values

编程功能 Via config pin: calibration, WIEGAND sensor test, filter selection, preset value, temperature

输出

输出驱动器 RS422

接口 M12, 公型, 8针, A码

电气数据

电源电压 4.75 – 15 VDC

功耗 Typical 32 mA, max 35 mA @5V DC

功耗 ≤ 0.3 W

启动时间 < 100 ms

时钟输入 RS422

时钟速度 80 kHz - 10 MHz

反极性保护 是

短路保护 是

EMC:发射干扰 The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up.

允许*高转速 12000 1/min

EMC:抗干扰 The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up.

MTTF 20 years @ 105 °C

传感器

技术 Magnetic TMR

单圈分辨率 Pre-programmed 17 bit

分辨率 多圈 Pre-programmed 16 bit

精度 (INL) ±0.0878° (≤12 bit) measured after calibration at room temp.

认证 认证/寿命 码制 码 二进制码

环境规格

外壳防护等级 (外壳) IP40

Min Temperature - 40 °C (- 40 °F)

Max Temperature +85 °C (+185 °F)

机械数据

顶部屏蔽 螺丝紧固

轴类型 盲孔

Kit Shaft Dimension 5 mm

轴的材料 不锈钢 V4A (1.4404, 316L)

轴紧固选项 轴上顶丝

*大轴向/径向 错位 静止 ± 0.3 mm /± 0.5 mm; 动态 ± 0.1 mm /± 0.2 mm

重量 155 g (0.34 lb)

转子转动惯量 ≤ 10 gcm² [≤ 0.06 oz-in²]

耐冲击性 ≤ 200 g (half sine 6 ms, EN 60068-2-27)

耐振动性 ≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6)

电气连接

Approval No CE